Keep the door.
Change the first impression.
Professional composite door spraying and front door restoration in Derby from SprayMasters. We repair, prepare and professionally recolour faded, dated and tired composite doors using coating systems selected around the actual door surface — without unnecessarily replacing a structurally sound entrance.
Why replace a good composite door simply because you dislike the colour?
Composite front doors are built as substantial entrance systems. If the slab, frame, locking mechanism and structure are still doing their job, replacing the complete unit because the exterior has faded, weathered or fallen out of fashion can be unnecessary.
Professional composite door spraying allows the existing door to be retained while completely changing its visible appearance. The door can move from faded red to black, rosewood to contemporary green, grey to blue or almost any suitable colour chosen for the property.
But the quality of a door respray is determined long before the final colour coat is applied. Composite doors can include textured GRP skins, uPVC frames, trims, glazing surrounds, seals, silicone and different types of existing factory finish. Those surfaces must be identified, cleaned and prepared correctly.
That is where SprayMasters approaches the job as a coatings project rather than ordinary decorating.
Keep the expensive bit. Transform the part everyone sees.
Change the Colour
Move away from dated colours without replacing the complete entrance system.
Restore Fading
Professionally refinish doors where UV exposure and weathering have left the original appearance dull or uneven.
Less Disruption
Avoid removing a serviceable frame, disturbing surrounding plaster, trim and decoration simply to achieve a new colour.
Complete Transformation
Combine the respray with refreshed handles, letterplates, numbers, silicone and suitable cosmetic repairs.
What can happen to a composite door over time?
Exterior doors live a hard life. UV exposure, temperature changes, cleaning products, constant handling and weather all act on the visible finish. Some problems are purely cosmetic. Others need identifying before any coating is considered.
South-facing and highly exposed doors can lose colour or fade unevenly. A professional respray can restore a consistent colour where the underlying door remains suitable.
Weathered surfaces may lose their original depth and sheen. The existing finish must be correctly prepared rather than simply covered with another layer of paint.
Suitable minor damage can often be repaired and refined before the new coating system is applied.
Brush marks, peeling coatings or badly applied previous resprays need assessment because the new finish will ultimately rely on whatever remains beneath it.
Old, dirty or deteriorated silicone around frames and adjoining surfaces can spoil an otherwise excellent transformation and may require renewal.
Warped slabs, damaged hinges, failed locks and structural movement are not paint problems. We identify these rather than disguising them.
A composite door is not a bedroom wall.
Many composite doors use textured GRP skins, while frames and adjoining components may be uPVC or other coated plastics. These surfaces respond differently to contamination, abrasion, primers and topcoats.
That is why SprayMasters does not treat every door with one generic “clean it and spray it” method.
The system is built around the actual surface, existing condition, exposure and intended finish.
How we professionally respray a composite front door.
Photo Assessment
Send a straight-on photograph of the complete door plus closer images of the frame, hardware and any fading, chips or existing paint damage.
Condition Check
We assess the door surface, frame, seals, existing finish and visible structural issues before confirming the proposed coating route.
Protection
Glass, surrounding brickwork, thresholds, walls, floors, seals and adjacent surfaces are carefully protected before preparation begins.
Clean & Prepare
The door is professionally cleaned, decontaminated and mechanically prepared. Suitable cosmetic defects are repaired where included in the scope.
Prime & Spray
The specified adhesion and coating system is applied using professional spray equipment for controlled, even coverage.
Detail & Inspect
Masking is carefully removed, details are checked, hardware is refitted where applicable and the completed finish is inspected before handover.
Spraying over damage doesn't make the damage disappear.
Where appropriate, cosmetic defects should be dealt with during preparation rather than simply buried under a new colour.
Chips, scratches & surface marks
Suitable minor imperfections can often be repaired or refined before spraying so they do not remain obvious through the new finish.
Old handle or hardware marks
Changing door furniture can expose old fixing marks or different footprints. We assess these before fitting the replacement hardware.
Previous failed coating
Loose or poorly adhered previous paint cannot simply be trusted as the foundation for another ten years. Additional remedial preparation may be required.
Silicone & finishing details
Where agreed, tired sealant and surrounding details can be refreshed so the finished entrance looks intentional rather than simply repainted.
Your front door doesn't have to be anthracite grey.
RAL 7016 has had a good innings, but professional composite door spraying gives homeowners far more choice than a handful of factory colours.
SprayMasters can work from recognised colour references including RAL and BS shades and can discuss colours inspired by popular architectural and interior palettes.
The smartest colour is not always the current trend. It should work with the brick, render, windows, roofline, garage door and architectural style of the property.
Where useful, send us a straight-on photograph of your entrance and colour inspiration before deciding.
The hardware can date a door just as quickly as the colour.
A professional respray is often the ideal time to update the details around the entrance so the final result feels like a complete transformation.
A faded colour is not the same thing as a failed door.
Replacing the complete door
- Existing door and frame removed
- New unit manufactured and installed
- Potential disturbance to trims and internal finishes
- Serviceable material becomes waste
- Higher cost where only the colour was wrong
- Still worthwhile when the actual door has structurally failed
Professional door respraying
- Keep the existing structural door
- Completely change the visible colour
- Restore weathered appearance
- Include suitable cosmetic repairs
- Upgrade handles and door furniture
- Coordinate with windows and garage doors
- Much less invasive when replacement is unnecessary
A guarantee should follow good preparation — not replace it.
Qualifying SprayMasters composite door coating systems are backed by a 10-year written guarantee, subject to the condition of the substrate, agreed specification, exposure and aftercare terms.
But the important bit is what sits behind the paperwork: decontamination, correct preparation, substrate-specific adhesion, controlled application and sensible curing.
A ten-year promise written on top of poor preparation is still poor preparation. We build the coating system first and put the guarantee behind it.
*Guarantee eligibility and exclusions are confirmed with the quotation and depend on the existing door condition and agreed coating system.
What a composite door respray cannot fix.
Good coating work starts with knowing when paint is not the answer.
Warped door slabs
Spraying can transform appearance, but it cannot straighten a structurally warped or bowed door.
Failed locks & hinges
Mechanical problems need mechanical repair. A respray should not be used to disguise functional defects.
Serious structural damage
If the door or frame has reached the end of its useful life, replacement may be the smarter investment.
Local door spraying from a Derby coatings company.
SprayMasters is based at Unit 3, Perkins Way, Mansfield Road, Derby, DE21 4AW and provides composite door spraying, uPVC spraying and specialist surface refinishing throughout Derby and surrounding areas.
For complete exterior transformations we can also assess suitable uPVC windows, frames and related architectural surfaces.
See our main uPVC Spraying Derby service →
Derby City • Mickleover • Littleover • Allestree • Darley Abbey • Oakwood • Spondon • Chellaston • Alvaston • Chaddesden • Sinfin • Quarndon • Duffield • Mackworth • Shelton Lock • Boulton Moor
Wider Derbyshire:
Belper • Ripley • Heanor • Ilkeston • Borrowash • Breaston • Long Eaton • Ashbourne • Alfreton and suitable surrounding locations.
Nottingham:
Suitable composite door and exterior spraying projects are also undertaken across Nottingham and surrounding areas.
The difference isn't the spray gun. It's knowing what goes underneath.
SprayMasters is led by Ashley Wright, a coatings specialist with more than 20 years of practical application experience across residential, architectural and commercial surfaces.
That experience includes coating application, product testing, surface preparation, remedial work and assessment of poor or failing coating systems.
Composite door spraying benefits from that same discipline: identify the substrate, understand the existing finish, prepare it correctly, specify the coating system and then apply it with control.
Questions homeowners ask before having a composite door sprayed.
Can a composite front door really be spray painted?
Yes. Many composite doors can be professionally recoloured when the underlying door and surface remain suitable for refinishing.
The important part is correctly identifying and preparing the existing surface before applying a compatible coating system.
Can you spray a faded composite door?
Yes, subject to inspection. UV fading and weathering are common reasons homeowners choose a composite door respray.
The existing surface is cleaned and prepared before the new colour system is applied rather than simply spraying over the faded finish.
How much does composite door spraying cost in Derby?
The price depends on whether you require only the door slab or the door and frame, plus side panels, glazing detail, repairs, silicone, hardware changes and overall condition.
Send a clear straight-on photograph, close-ups of any damage and your postcode for the quickest accurate quotation.
Is spraying a composite door cheaper than buying a new one?
Where the existing door is structurally sound, respraying is normally far less invasive than replacing the complete door and frame simply to obtain a different colour.
If the actual door has structural or mechanical problems that make it unsuitable for continued use, replacement may be the better option.
Will the original woodgrain texture still show?
On suitable textured GRP doors, yes. The coating is applied with controlled coverage so the moulded texture is not unnecessarily flooded and buried beneath excessive paint.
Can you spray the frame as well as the door?
Yes. Door frames, suitable side panels, surrounds and adjoining uPVC elements can be included so the entrance has one coordinated finish.
Can you spray composite doors any colour?
There is an enormous colour choice. SprayMasters can work with recognised references including RAL and BS colours and can discuss colour matching to other suitable exterior finishes.
Can you match my composite door to my windows or garage door?
Often, yes. If there is a recognised colour reference we can work from it, or we can assess suitable colour matching options as part of the quotation.
SprayMasters also provides uPVC window spraying in Derby for customers planning a wider exterior colour transformation.
Can scratches and chips be repaired before spraying?
Suitable cosmetic defects can often be repaired or refined during preparation. Significant structural damage is different and will be identified before coating.
Can you replace handles and letterboxes at the same time?
Yes, where compatible replacement hardware is available. A door respray is an ideal opportunity to modernise handles, letterplates, knockers and numbers so the entire entrance changes rather than only the colour.
Do you spray rubber seals and weather gaskets?
No. Functional seals and gaskets are normally protected from coating. Painting flexible weather seals can interfere with their function and create an untidy result.
How long does a composite door respray take?
Many standard single-door projects can be completed in one working visit, although larger frames, side panels, repairs, previous coating failure and weather conditions can increase the programme.
We will explain the expected working and curing requirements before the project begins.
How long will a professionally sprayed composite door last?
Longevity depends on preparation, substrate condition, exposure, coating specification and aftercare.
Qualifying SprayMasters composite door coating systems are backed by a written 10-year guarantee, with applicable terms confirmed in the quotation.
Can you spray a composite door that has previously been painted?
Potentially, but the existing coating needs assessing first. A new coating is only as secure as the layers underneath it.
If previous paint has poor adhesion or is already peeling, additional removal or remedial preparation may be required before another system can responsibly be applied.
Do SprayMasters spray composite doors throughout Derby?
Yes. SprayMasters is based in Derby DE21 and provides composite door spraying throughout Derby, Mickleover, Littleover, Allestree, Darley Abbey, Oakwood, Spondon, Chellaston and surrounding Derbyshire areas.
The door works.
You just hate looking at it.
Send SprayMasters a few photographs and your postcode. We will assess the existing door, explain what is realistically possible and provide a straightforward route to a professional composite door spraying quotation.
1 full photograph of the entrance • close-ups of any fading or damage • whether the frame is being sprayed • any side panels • your postcode • your preferred colour if known.
SprayMasters
Unit 3, Perkins Way, Mansfield Road, Derby DE21 4AW.